Unist The Mini-Piggyback™ System

0

Lubrication Coolant Distribution

Unist The Mini-Piggyback™ System

QUANTITY

Portable cutter lubrication system

The Mini-Piggyback system sets a new standard for lubricating cutting tools on positive feed drills. This system uses a positive displacement pump to precisely apply the right amount of lubrication to the cutting tool, hole after hole.

Share

The Unist Mini-Piggyback system sets a new standard for lubricating cutting tools on positive feed drills. This system uses a positive displacement pump to precisely apply the right amount of lubrication to the cutting tool, hole after hole. The operator can easily adjust both the fluid and the air output to “dial-in” the perfect setting for any tool.

The Mini-Piggyback is 100% pneumatically operated. It is designed to use air supplied “downstream” from the tool trigger, so it operates whenever the tool is running. The fluid supply is contained in a removable reservoir that can easily be exchanged when empty. Empty reservoirs can be refilled using the Unist reservoir refill stations, so they’re ready to use again. The lubricant may also be supplied from a remote gravity-feed or pressurized reservoir. The Mini-Piggyback can dispense a wide range of lubricants with varying viscosities. Atomizing air can be easily adjusted or turned off completely.

 

The Mini-Piggyback is available in two configurations: continuous output, which provides a constant delivery of lubricant for operations with long cycle times, and intermittent-output, which provides a single shot of lubricant for smaller cutting tools with short cycle times.

                                                          minipig3

 


                                             minipig4

 

Stay productive with Mini-Piggyback

The automatic and manual Mini-Piggyback reservoir refill stations are designed to allow swift and easy refilling of quick-change Mini-Piggyback reservoirs. The stations fill Mini-Piggyback reservoirs and virtually eliminate trapped air which can cause inconsistent fluid output. Using these stations ensures properly filled reservoirs every time.

minipig5                            minipig6

 

A unique feature of the Mini-Piggyback system is the removable, interchangeable fluid reservoir. This allows the lubricant to be replenished almost instantly by simply replacing the empty reservoir with a full one, maximizing the productivity of the tool.       

                               

 

minipig1

 

minipig2

 

 

  • Increases cutting tool life
  • Improves hole quality
  • Easy to install on most positive feed drills
  • 100% pneumatic - no electricity required
Injector Output: 1 Drop (0.05 mL) per pulse
Pump Rate: 4 to 200 Cycles per minute
Inlet Air: 70-115 psi (5-8 Bar)
Reservoir Capacity: 25 mL or 55 mL (500 or 1100 pump cycles)

 

UNLOCK GREAT OFFERS! DON’T MISS OUT AND FOLLOW US ON  fb