Schunk Manual Lathe Chuck (ROTA-S plus 2.0) - ISO 702-1

0

Tool Clamping Solutions

Schunk Manual Lathe Chuck (ROTA-S plus 2.0) - ISO 702-1

QUANTITY

Jaw Quick Change in less than 60 seconds

Universal 3-jaw manual chuck with jaw quick-change system for jaw quick-change in less than 60 seconds.

Share

Definition clamping force
The clamping force is the arithmetic sum of the individual forces occuring at the chuck jaws, distance “H“ at maximum pressure and maximum torque. The specifications exclusively refer to the grease used by SCHUNK.

 

Field of application

  • on conventional lathes
  • on cycle-controlled lathes
  • on mill/turn machines
  • on drill / boring machines
  • on welding systems
  • on special machines
  • 3-jaw wedge-bar chuck
  • Jaw quick-change system
  • Through-hole: 42 mm
  • Spindle holder: ISO 702-1 Nr. 4, 5, 6, 8, 11 & 15
  • Jaw interface: Angled serration
Characterization ID O.D- Diameter Spindle Type Spindle Size Serration Max. RPM(1/min) Max.clamping force(kN) Max.Torque(Nm) Stroke/jaw(mm) Tooth Pitch(mm) Height H with adapter plate
[mm]
Weight(kg)
ROTA-S plus 2.0 160-42 A4-SFG 0819071 160 mm ISO 702-1 Nr.4 Angled Serration 5400 65 80 6.5 4.8 81.5 9.8
ROTA-S plus 2.0 160-42 A4-VP1 0819271 160 mm ISO 702-1 Nr.4 Angled Serration 5400 65 80 6.5 4.8 81.5 9.8
ROTA-S plus 2.0 160-42 A4-VP2 0819171 160 mm ISO 702-1 Nr.4 Angled Serration 5400 65 80 6.5 4.8 81.5 9.8
ROTA-S plus 2.0 160-42 A5-SFG 0819081 160 mm ISO 702-1 Nr.5 Angled Serration 5400 65 80 6.5 4.8 83.5 9.8
ROTA-S plus 2.0 160-42 A5-VP1 0819281 160 mm ISO 702-1 Nr.5 Angled Serration 5400 65 80 6.5 4.8 83.5 9.8
ROTA-S plus 2.0 160-42 A5-VP2 0819181 160 mm ISO 702-1 Nr.5 Angled Serration 5400 65 80 6.5 4.8 83.5 9.8
ROTA-S plus 2.0 200-52 A4-SFG 0819082 200 mm ISO 702-1 Nr.4 Angled Serration 4800 100 120 7 4.8 99.3 19.3
ROTA-S plus 2.0 200-52 A4-VP1 0819282 200 mm ISO 702-1 Nr.4 Angled Serration 4800 100 120 7 4.8 99.3 19.3
ROTA-S plus 2.0 200-52 A4-VP2 0819182 200 mm ISO 702-1 Nr.4 Angled Serration 4800 100 120 7 4.8 99.3 19.3
ROTA-S plus 2.0 200-52 A5-SFG 0819092 200 mm ISO 702-1 Nr.5 Angled Serration 4800 100 120 7 4.8 100.3 19.3
ROTA-S plus 2.0 200-52 A5-VP1 0819292 200 mm ISO 702-1 Nr.5 Angled Serration 4800 100 120 7 4.8 100.3 19.3
ROTA-S plus 2.0 200-52 A5-VP2 0819192 200 mm ISO 702-1 Nr.5 Angled Serration 4800 100 120 7 4.8 100.3 19.3
ROTA-S plus 2.0 200-52 A6-SFG 0819091 200 mm ISO 702-1 Nr.6 Angled Serration 4800 100 120 7 4.8 103.3 19.5
ROTA-S plus 2.0 200-52 A6-VP1 0819291 200 mm ISO 702-1 Nr.6 Angled Serration 4800 100 120 7 4.8 103.3 19.5
ROTA-S plus 2.0 200-52 A6-VP2 0819191 200 mm ISO 702-1 Nr.6 Angled Serration 4800 100 120 7 4.8 103.3 19.5
ROTA-S plus 2.0 250-62 A5-SFG 0819073 250 mm ISO 702-1 Nr.5 Angled Serration 4200 160 210 7.5 6 110 33.8
ROTA-S plus 2.0 250-62 A5-VP1 0819273 250 mm ISO 702-1 Nr.5 Angled Serration 4200 160 210 7.5 6 110 33.8
ROTA-S plus 2.0 250-62 A5-VP2 0819173 250 mm ISO 702-1 Nr.5 Angled Serration 4200 160 210 7.5 6 110 33.8
ROTA-S plus 2.0 250-62 A6-SFG 0819083 250 mm ISO 702-1 Nr.6 Angled Serration 4200 160 210 7.5 6 112 34
ROTA-S plus 2.0 250-62 A6-VP1 0819283 250 mm ISO 702-1 Nr.6 Angled Serration 4200 160 210 7.5 6 112 34
ROTA-S plus 2.0 250-62 A6-VP2 0819183 250 mm ISO 702-1 Nr.6 Angled Serration 4200 160 210 7.5 6 112 34
ROTA-S plus 2.0 250-62 A8-SFG 0819093 250 mm ISO 702-1 Nr.8 Angled Serration 4200 160 210 7.5 6 120 35.7
ROTA-S plus 2.0 250-62 A8-VP1 0819293 250 mm ISO 702-1 Nr.8 Angled Serration 4200 160 210 7.5 6 120 35.7
ROTA-S plus 2.0 250-62 A8-VP2 0819193 250 mm ISO 702-1 Nr.8 Angled Serration 4200 160 210 7.5 6 120 35.7
ROTA-S plus 2.0 315-92 A6-SFG 0819074 315 mm ISO 702-1 Nr.6 Angled Serration 3400 180 220 9.7 7 136 65.6
ROTA-S plus 2.0 315-92 A6-VP1 0819274 315 mm ISO 702-1 Nr.6 Angled Serration 3400 180 220 9.7 7 136 65.6
ROTA-S plus 2.0 315-92 A6-VP2 0819174 315 mm ISO 702-1 Nr.6 Angled Serration 3400 180 220 9.7 7 136 65.6
ROTA-S plus 2.0 315-92 A8-SFG 0819084 315 mm ISO 702-1 Nr.8 Angled Serration 3400 180 220 9.7 7 136 64.8
ROTA-S plus 2.0 315-92 A8-VP1 0819284 315 mm ISO 702-1 Nr.8 Angled Serration 3400 180 220 9.7 7 136 64.8
ROTA-S plus 2.0 315-92 A8-VP2 0819184 315 mm ISO 702-1 Nr.8 Angled Serration 3400 180 220 9.7 7 136 64.8
ROTA-S plus 2.0 315-92 A11-SFG 0819094 315 mm ISO 702-1 Nr.11 Angled Serration 3400 180 220 9.7 7 146 67.6
ROTA-S plus 2.0 315-92 A11-VP1 0819294 315 mm ISO 702-1 Nr.11 Angled Serration 3400 180 220 9.7 7 146 67.6
ROTA-S plus 2.0 315-92 A11-VP2 0819194 315 mm ISO 702-1 Nr.11 Angled Serration 3400 180 220 9.7 7 146 67.6
ROTA-S plus 2.0 400-102 A8-SFG 0814245 400 mm ISO 702-1 Nr.8 Angled Serration 2200 230 280 12 8.5 - 108
ROTA-S plus 2.0 400-102 A8-VP1 0814345 400 mm ISO 702-1 Nr.8 Angled Serration 2200 230 280 12 8.5 - 108
ROTA-S plus 2.0 400-102 A8-VP2 0814645 400 mm ISO 702-1 Nr.8 Angled Serration 2200 230 280 12 8.5 - 108
ROTA-S plus 2.0 400-102 A11-SFG 0814246 400 mm ISO 702-1 Nr.11 Angled Serration 2200 230 280 12 8.5 - 107
ROTA-S plus 2.0 400-102 A11-VP1 0814346 400 mm ISO 702-1 Nr.11 Angled Serration 2200 230 280 12 8.5 - 107
ROTA-S plus 2.0 400-102 A11-VP2 0814646 400 mm ISO 702-1 Nr.11 Angled Serration 2200 230 280 12 8.5 - 107
ROTA-S plus 2.0 400-102 A15-SFG 0814249 400 mm ISO 702-1 Nr.15 Angled Serration 2200 230 280 12 8.5 - 105
ROTA-S plus 2.0 400-102 A15-VP1 0814349 400 mm ISO 702-1 Nr.15 Angled Serration 2200 230 280 12 8.5 - 105
ROTA-S plus 2.0 400-102 A15-VP2 0814649 400 mm ISO 702-1 Nr.15 Angled Serration 2200 230 280 12 8.5 - 105
ROTA-S plus 2.0 500-162 A8-SFG 0814257 500 mm ISO 702-1 Nr.8 Angled Serration 1500 270 320 12 8.5 - 192
ROTA-S plus 2.0 500-162 A8-VP1 0814357 500 mm ISO 702-1 Nr.8 Angled Serration 1500 270 320 12 8.5 - 192
ROTA-S plus 2.0 500-162 A8-VP2 0814657 500 mm ISO 702-1 Nr.8 Angled Serration 1500 270 320 12 8.5 - 192
ROTA-S plus 2.0 500-162 A11-SFG 0814258 500 mm ISO 702-1 Nr.11 Angled Serration 1500 270 320 12 8.5 - 171
ROTA-S plus 2.0 500-162 A11-VP1 0814358 500 mm ISO 702-1 Nr.11 Angled Serration 1500 270 320 12 8.5 - 171
ROTA-S plus 2.0 500-162 A11-VP2 0814658 500 mm ISO 702-1 Nr.11 Angled Serration 1500 270 320 12 8.5 - 171
ROTA-S plus 2.0 500-162 A15-SFG 0814259 500 mm ISO 702-1 Nr.15 Angled Serration 1500 270 320 12 8.5 - 183
ROTA-S plus 2.0 500-162 A15-VP1 0814359 500 mm ISO 702-1 Nr.15 Angled Serration 1500 270 320 12 8.5 - 183
ROTA-S plus 2.0 500-162 A15-VP2 0814659 500 mm ISO 702-1 Nr.15 Angled Serration 1500 270 320 12 8.5 - 183
ROTA-S plus 2.0 630-252 A11-SFG 0814265 630 mm ISO 702-1 Nr.11 Angled Serration 1000 270 350 15 8.5 - 256
ROTA-S plus 2.0 630-252 A11-VP2 0814665 630 mm ISO 702-1 Nr.11 Angled Serration 1000 270 350 15 8.5 - 256
ROTA-S plus 2.0 630-252 A15-SFG 0814266 630 mm ISO 702-1 Nr.15 Angled Serration 1000 270 350 15 8.5 - 256
ROTA-S plus 2.0 630-252 A11-VP2 0814666 630 mm ISO 702-1 Nr.15 Angled Serration 1000 270 350 15 8.5 - 256
ROTA-S plus 2.0 800-252 A15-SFG 0814284 800 mm ISO 702-1 Nr.15 Angled Serration 1000 270 350 15 8.5 - 465

 

  • Convenient jaw quick-change system -Minimizing set-up times and costs
  • Large through-hole -Machining of all standard pipe diameters
  • High efficiency of the wedge bar system -Process-reliable clamping due to high clamping forces
  • High jaw quick-change repeatability -No reboring of already machined jaws necessary
  • Visual safety devices -Maximum operating safety
  • Optimized lubrication system -Consistently high clamping forces are ensured
  • Modular center sleeve system -Optimum adjustment to new clamping tasks due to exchangeable center sleeves
  • Excellent clamping force/torque ratio -Perfect use of the machine performance
  • Angled serrated base jaws SFG -Interchangeable with ROTA-S plus and with system “F“ (Forkardt)
  • Ergonomic, light safety spanner wrench -Ensures easy operation
  • All functional parts are ground and hardened -High run-out and jaw change repeat accuracy

The ROTA-S plus 2.0 manual lathe chuck is a highly efficient power lathe chuck for the most varied of clamping tasks. This is available as a 2-jaw or 3-jaw chuck. The high degree of efficiency of the wedge bar system and the optimized lubrication system ensure process-reliable clamping and consistently high clamping forces. The excellent clamping force/speed ratio allows full use of the machine performance, and increases efficiency in your production.

You can reduce set-up costs with the ROTA-S plus 2.0 quick-change jaw range, which cuts the set-up process down to less than 60 seconds. Due to its protection sleeve system the ROTA-S plus 2.0 can be adapted to a wide range of clamping tasks.

 

UNLOCK GREAT OFFERS! DON’T MISS OUT AND FOLLOW US ON  fb