Schunk Manual Lathe Chuck (ROTA-S plus 2.0) - ISO 702-3

0

Tool Clamping Solutions

Schunk Manual Lathe Chuck (ROTA-S plus 2.0) - ISO 702-3

QUANTITY

Jaw Quick Change in less than 60 seconds

Universal 3-jaw manual chuck with jaw quick-change system for jaw quick-change in less than 60 seconds.

Share

Definition clamping force
The clamping force is the arithmetic sum of the individual forces occuring at the chuck jaws, distance “H“ at maximum pressure and maximum torque. The specifications exclusively refer to the grease used by SCHUNK.

 

Field of application

  • on conventional lathes
  • on cycle-controlled lathes
  • on mill/turn machines
  • on drill / boring machines
  • on welding systems
  • on special machines
  • 3-jaw wedge-bar chuck
  • Jaw quick-change system
  • Through-hole: 42 mm
  • Spindle holder: ISO 702-1 Nr. 4, 5, 6, 8, 11 & 15
  • Jaw interface: Angled serration
Characterization ID O.D- Diameter Spindle Type Spindle Size Serration Max. RPM(1/min) Max.clamping force(kN) Max.Torque(Nm) Stroke/jaw(mm) Tooth Pitch(mm) Height H with adapter plate
[mm]
Weight(kg)
ROTA-S plus 2.0 160-42 C4-SFG 0819011 160 mm ISO 702-3 Nr.4 Angled Serration 5400 65 80 6.5 4.8 75.5 9.3
ROTA-S plus 2.0 160-42 C4-VP1 0819211 160 mm ISO 702-3 Nr.4 Angled Serration 5400 65 80 6.5 4.8 75.5 9.3
ROTA-S plus 2.0 160-42 C4-VP2 0819111 160 mm ISO 702-3 Nr.4 Angled Serration 5400 65 80 6.5 4.8 75.5 9.3
ROTA-S plus 2.0 160-42 C5-SFG 0819021 160 mm ISO 702-3 Nr.5 Angled Serration 5400 65 80 6.5 4.8 79.5 9.6
ROTA-S plus 2.0 160-42 C5-VP1 0819221 160 mm ISO 702-3 Nr.5 Angled Serration 5400 65 80 6.5 4.8 79.5 9.6
ROTA-S plus 2.0 160-42 C5-VP2 0819121 160 mm ISO 702-3 Nr.5 Angled Serration 5400 65 80 6.5 4.8 79.5 9.6
ROTA-S plus 2.0 160-42 C6-SFG 0819031 160 mm ISO 702-3 Nr.6 Angled Serration 5400 65 80 6.5 4.8 85.5 10.4
ROTA-S plus 2.0 160-42 C6-VP1 0819231 160 mm ISO 702-3 Nr.6 Angled Serration 5400 65 80 6.5 4.8 85.5 10.4
ROTA-S plus 2.0 160-42 C6-VP2 0819131 160 mm ISO 702-3 Nr.6 Angled Serration 5400 65 80 6.5 4.8 85.5 10.4
ROTA-S plus 2.0 200-52 C4-SFG 0819012 200 mm ISO 702-3 Nr.4 Angled Serration 4800 100 120 7 4.8 93.3 18.4
ROTA-S plus 2.0 200-52 C4-VP1 0819212 200 mm ISO 702-3 Nr.4 Angled Serration 4800 100 120 7 4.8 93.3 18.4
ROTA-S plus 2.0 200-52 C4-VP2 0819112 200 mm ISO 702-3 Nr.4 Angled Serration 4800 100 120 7 4.8 93.3 18.4
ROTA-S plus 2.0 200-52 C5-SFG 0819022 200 mm ISO 702-3 Nr.5 Angled Serration 4800 100 120 7 4.8 95.3 18.6
ROTA-S plus 2.0 200-52 C5-VP1 0819222 200 mm ISO 702-3 Nr.5 Angled Serration 4800 100 120 7 4.8 95.3 18.6
ROTA-S plus 2.0 200-52 C5-VP2 0819122 200 mm ISO 702-3 Nr.5 Angled Serration 4800 100 120 7 4.8 95.3 18.6
ROTA-S plus 2.0 200-52 C6-SFG 0819032 200 mm ISO 702-3 Nr.6 Angled Serration 4800 100 120 7 4.8 97.3 18.6
ROTA-S plus 2.0 200-52 C6-VP1 0819232 200 mm ISO 702-3 Nr.6 Angled Serration 4800 100 120 7 4.8 97.3 18.6
ROTA-S plus 2.0 200-52 C6-VP2 0819132 200 mm ISO 702-3 Nr.6 Angled Serration 4800 100 120 7 4.8 97.3 18.6
ROTA-S plus 2.0 200-52 C8-SFG 0819042 200 mm ISO 702-3 Nr.8 Angled Serration 4800 100 120 7 4.8 108.3 22
ROTA-S plus 2.0 200-52 C8-VP1 0819242 200 mm ISO 702-3 Nr.8 Angled Serration 4800 100 120 7 4.8 108.3 22
ROTA-S plus 2.0 200-52 C8-VP2 0819142 200 mm ISO 702-3 Nr.8 Angled Serration 4800 100 120 7 4.8 108.3 22
ROTA-S plus 2.0 250-62 C5-SFG 0819013 250 mm ISO 702-3 Nr.5 Angled Serration 4200 160 210 7.5 6 107 33.2
ROTA-S plus 2.0 250-62 C5-VP1 0819213 250 mm ISO 702-3 Nr.5 Angled Serration 4200 160 210 7.5 6 107 32.2
ROTA-S plus 2.0 250-62 C5-VP2 0819113 250 mm ISO 702-3 Nr.5 Angled Serration 4200 160 210 7.5 6 107 33.2
ROTA-S plus 2.0 250-62 C6-SFG 0819023 250 mm ISO 702-3 Nr.6 Angled Serration 4200 160 210 7.5 6 108 33.2
ROTA-S plus 2.0 250-62 C6-VP1 0819223 250 mm ISO 702-3 Nr.6 Angled Serration 4200 160 210 7.5 6 108 33.2
ROTA-S plus 2.0 250-62 C6-VP2 0819123 250 mm ISO 702-3 Nr.6 Angled Serration 4200 160 210 7.5 6 108 33.2
ROTA-S plus 2.0 250-62 C8-SFG 0819033 250 mm ISO 702-3 Nr.8 Angled Serration 4200 160 210 7.5 6 112 33.9
ROTA-S plus 2.0 250-62 C8-VP1 0819233 250 mm ISO 702-3 Nr.8 Angled Serration 4200 160 210 7.5 6 112 33.9
ROTA-S plus 2.0 250-62 C8-VP2 0819133 250 mm ISO 702-3 Nr.8 Angled Serration 4200 160 210 7.5 6 112 33.9
ROTA-S plus 2.0 315-92 C6-SFG 0819014 315 mm ISO 702-3 Nr.6 Angled Serration 3400 180 220 9.7 7 128 62.1
ROTA-S plus 2.0 315-92 C6-VP1 0819214 315 mm ISO 702-3 Nr.6 Angled Serration 3400 180 220 9.7 7 128 62.1
ROTA-S plus 2.0 315-92 C6-VP2 0819114 315 mm ISO 702-3 Nr.6 Angled Serration 3400 180 220 9.7 7 128 62.1
ROTA-S plus 2.0 315-92 C8-SFG 0819024 315 mm ISO 702-3 Nr.8 Angled Serration 3400 180 220 9.7 7 130 62.6
ROTA-S plus 2.0 315-92 C8-VP1 0819224 315 mm ISO 702-3 Nr.8 Angled Serration 3400 180 220 9.7 7 130 62.6
ROTA-S plus 2.0 315-92 C8-VP2 0819124 315 mm ISO 702-3 Nr.8 Angled Serration 3400 180 220 9.7 7 130 62.6
ROTA-S plus 2.0 315-92 C11-SFG 0819034 315 mm ISO 702-3 Nr.11 Angled Serration 3400 180 220 9.7 7 133 63.3
ROTA-S plus 2.0 315-92 C11-VP1 0819234 315 mm ISO 702-3 Nr.11 Angled Serration 3400 180 220 9.7 7 133 63.3
ROTA-S plus 2.0 315-92 C11-VP2 0819134 315 mm ISO 702-3 Nr.11 Angled Serration 3400 180 220 9.7 7 133 63.3
ROTA-S plus 2.0 400-102 C8-SFG 0814241 400 mm ISO 702-3 Nr.8 Angled Serration 2200 230 280 12 8.5 - 113
ROTA-S plus 2.0 400-102 C8-VP1 0814341 400 mm ISO 702-3 Nr.8 Angled Serration 2200 230 280 12 8.5 - 113
ROTA-S plus 2.0 400-102 C8-VP2 0814641 400 mm ISO 702-3 Nr.8 Angled Serration 2200 230 280 12 8.5 - 113
ROTA-S plus 2.0 400-102 C11-SFG 0814242 400 mm ISO 702-3 Nr.11 Angled Serration 2200 230 280 12 8.5 - 110
ROTA-S plus 2.0 400-102 C11-VP1 0814342 400 mm ISO 702-3 Nr.11 Angled Serration 2200 230 280 12 8.5 - 110
ROTA-S plus 2.0 400-102 C11-VP2 0814642 400 mm ISO 702-3 Nr.11 Angled Serration 2200 230 280 12 8.5 - 110
ROTA-S plus 2.0 500-162 C8-SFG 0814255 500 mm ISO 702-3 Nr.8 Angled Serration 1500 270 320 12 8.5 - 175
ROTA-S plus 2.0 500-162 C8-VP1 0814251 500 mm ISO 702-3 Nr.8 Angled Serration 1500 270 320 12 8.5 - 175
ROTA-S plus 2.0 500-162 C8-VP2 0814351 500 mm ISO 702-3 Nr.8 Angled Serration 1500 270 320 12 8.5 - 175
ROTA-S plus 2.0 500-162 C11-SFG 0814651 500 mm ISO 702-3 Nr.11 Angled Serration 1500 270 320 12 8.5 - 172
ROTA-S plus 2.0 500-162 C11-VP1 0814252 500 mm ISO 702-3 Nr.11 Angled Serration 1500 270 320 12 8.5 - 172
ROTA-S plus 2.0 500-162 C11-VP2 0814352 500 mm ISO 702-3 Nr.11 Angled Serration 1500 270 320 12 8.5 - 172
ROTA-S plus 2.0 500-162 C15-SFG 0814253 500 mm ISO 702-3 Nr.15 Angled Serration 1500 270 320 12 8.5 - 174
ROTA-S plus 2.0 500-162 C15-VP1 0814353 500 mm ISO 702-3 Nr.15 Angled Serration 1500 270 320 12 8.5 - 174
ROTA-S plus 2.0 500-162 C15-VP2 0814653 500 mm ISO 702-3 Nr.15 Angled Serration 1500 270 320 12 8.5 - 174
ROTA-S plus 2.0 630-252 C11-SFG 0814261 630 mm ISO 702-3 Nr.11 Angled Serration 1000 270 350 15 8.5 - 256
ROTA-S plus 2.0 630-252 C11-VP2 0814261 630 mm ISO 702-3 Nr.11 Angled Serration 1000 270 350 15 8.5   256
ROTA-S plus 2.0 630-252 C15-SFG 0814262 630 mm ISO 702-3 Nr.15 Angled Serration 1000 270 350 15 8.5   256
ROTA-S plus 2.0 630-252 C15-VP2 0814662 630 mm ISO 702-3 Nr.15 Angled Serration 1000 270 350 15 8.5   256

 

  • Convenient jaw quick-change system -Minimizing set-up times and costs
  • Large through-hole -Machining of all standard pipe diameters
  • High efficiency of the wedge bar system -Process-reliable clamping due to high clamping forces
  • High jaw quick-change repeatability -No reboring of already machined jaws necessary
  • Visual safety devices -Maximum operating safety
  • Optimized lubrication system -Consistently high clamping forces are ensured
  • Modular center sleeve system -Optimum adjustment to new clamping tasks due to exchangeable center sleeves
  • Excellent clamping force/torque ratio -Perfect use of the machine performance
  • Angled serrated base jaws SFG -Interchangeable with ROTA-S plus and with system “F“ (Forkardt)
  • Ergonomic, light safety spanner wrench -Ensures easy operation
  • All functional parts are ground and hardened -High run-out and jaw change repeat accuracy

The ROTA-S plus 2.0 manual lathe chuck is a highly efficient power lathe chuck for the most varied of clamping tasks. This is available as a 2-jaw or 3-jaw chuck. The high degree of efficiency of the wedge bar system and the optimized lubrication system ensure process-reliable clamping and consistently high clamping forces. The excellent clamping force/speed ratio allows full use of the machine performance, and increases efficiency in your production.

You can reduce set-up costs with the ROTA-S plus 2.0 quick-change jaw range, which cuts the set-up process down to less than 60 seconds. Due to its protection sleeve system the ROTA-S plus 2.0 can be adapted to a wide range of clamping tasks.

 

UNLOCK GREAT OFFERS! DON’T MISS OUT AND FOLLOW US ON  fb