Schunk Manual Lathe Chuck (ROTA-S plus 2.0) - ISO 702-2

0

Tool Clamping Solutions

Schunk Manual Lathe Chuck (ROTA-S plus 2.0) - ISO 702-2

QUANTITY

Jaw Quick Change in less than 60 seconds

Universal 3-jaw manual chuck with jaw quick-change system for jaw quick-change in less than 60 seconds.

Share

Definition clamping force
The clamping force is the arithmetic sum of the individual forces occuring at the chuck jaws, distance “H“ at maximum pressure and maximum torque. The specifications exclusively refer to the grease used by SCHUNK.

 

Field of application

  • on conventional lathes
  • on cycle-controlled lathes
  • on mill/turn machines
  • on drill / boring machines
  • on welding systems
  • on special machines
  • 3-jaw wedge-bar chuck
  • Jaw quick-change system
  • Through-hole: 42 mm
  • Spindle holder: ISO 702-1 Nr. 4, 5, 6, 8, 11 & 15
  • Jaw interface: Angled serration
Characterization ID O.D- Diameter Spindle Type Spindle Size Serration Max. RPM(1/min) Max.clamping force(kN) Max.Torque(Nm) Stroke/jaw(mm) Tooth Pitch(mm) Height H with adapter plate
[mm]
Weight(kg)
ROTA-S plus 2.0 160-42 D4-SFG 0819041 160 mm ISO 702-2 Nr.4 Angled Serration 5400 65 80 6.5 4.8 85.5 10.3
ROTA-S plus 2.0 160-42 D4-VP1 0819241 160 mm ISO 702-2 Nr.4 Angled Serration 5400 65 80 6.5 4.8 85.5 10.3
ROTA-S plus 2.0 160-42 D4-VP2 0819141 160 mm ISO 702-2 Nr.4 Angled Serration 5400 65 80 6.5 4.8 85.5 10.3
ROTA-S plus 2.0 160-42 D5-SFG 0819051 160 mm ISO 702-2 Nr.5 Angled Serration 5400 65 80 6.5 4.8 87.5 10.6
ROTA-S plus 2.0 160-42 D5-VP1 0819251 160 mm ISO 702-2 Nr.5 Angled Serration 5400 65 80 6.5 4.8 87.5 10.6
ROTA-S plus 2.0 160-42 D5-VP2 0819151 160 mm ISO 702-2 Nr.5 Angled Serration 5400 65 80 6.5 4.8 87.5 10.6
ROTA-S plus 2.0 160-42 D6-SFG 0819061 160 mm ISO 702-2 Nr.6 Angled Serration 4800 65 80 6.5 4.8 103.5 14.4
ROTA-S plus 2.0 160-42 D6-VP1 0819261 160 mm ISO 702-2 Nr.6 Angled Serration 4800 65 80 6.5 4.8 103.5 14.4
ROTA-S plus 2.0 160-42 D6-VP2 0819161 160 mm ISO 702-2 Nr.6 Angled Serration 4800 65 80 6.5 4.8 103.5 14.4
ROTA-S plus 2.0 200-52 D4-SFG 0819052 200 mm ISO 702-2 Nr.4 Angled Serration 4800 100 120 7 4.8 99.3 19.4
ROTA-S plus 2.0 200-52 D4-VP1 0819252 200 mm ISO 702-2 Nr.4 Angled Serration 4800 100 120 7 4.8 99.3 19.4
ROTA-S plus 2.0 200-52 D4-VP2 0819152 200 mm ISO 702-2 Nr.4 Angled Serration 4800 100 120 7 4.8 99.3 19.4
ROTA-S plus 2.0 200-52 D5-SFG 0819062 200 mm ISO 702-2 Nr.5 Angled Serration 4800 100 120 7 4.8 101.3 19.8
ROTA-S plus 2.0 200-52 D5-VP1 0819262 200 mm ISO 702-2 Nr.5 Angled Serration 4800 100 120 7 4.8 101.3 19.8
ROTA-S plus 2.0 200-52 D5-VP2 0819162 200 mm ISO 702-2 Nr.5 Angled Serration 4800 100 120 7 4.8 101.3 19.8
ROTA-S plus 2.0 200-52 D6-SFG 0819072 200 mm ISO 702-2 Nr.6 Angled Serration 4800 100 120 7 4.8 106.3 20.6
ROTA-S plus 2.0 200-52 D6-VP1 0819272 200 mm ISO 702-2 Nr.6 Angled Serration 4800 100 120 7 4.8 106.3 20.6
ROTA-S plus 2.0 200-52 D6-VP2 0819172 200 mm ISO 702-2 Nr.6 Angled Serration 4800 100 120 7 4.8 106.3 20.6
ROTA-S plus 2.0 250-62 D5-SFG 0819043 250 mm ISO 702-2 Nr.5 Angled Serration 4200 160 210 7.5 6 112 34.8
ROTA-S plus 2.0 250-62 D5-VP1 0819243 250 mm ISO 702-2 Nr.5 Angled Serration 4200 160 210 7.5 6 112 34.8
ROTA-S plus 2.0 250-62 D5-VP2 0819143 250 mm ISO 702-2 Nr.5 Angled Serration 4200 160 210 7.5 6 112 34.8
ROTA-S plus 2.0 250-62 D6-SFG 0819053 250 mm ISO 702-2 Nr.6 Angled Serration 4200 160 210 7.5 6 117 36.2
ROTA-S plus 2.0 250-62 D6-VP1 0819253 250 mm ISO 702-2 Nr.6 Angled Serration 4200 160 210 7.5 6 117 36.2
ROTA-S plus 2.0 250-62 D6-VP2 0819153 250 mm ISO 702-2 Nr.6 Angled Serration 4200 160 210 7.5 6 117 36.2
ROTA-S plus 2.0 250-62 D8-SFG 0819063 250 mm ISO 702-2 Nr.8 Angled Serration 4200 160 210 7.5 6 122 37
ROTA-S plus 2.0 250-62 D8-VP1 0819263 250 mm ISO 702-2 Nr.8 Angled Serration 4200 160 210 7.5 6 122 37
ROTA-S plus 2.0 250-62 D8-VP2 0819163 250 mm ISO 702-2 Nr.8 Angled Serration 4200 160 210 7.5 6 122 37
ROTA-S plus 2.0 315-92 D6-SFG 0819044 315 mm ISO 702-2 Nr.6 Angled Serration 3400 180 220 9.7 7 133 64.7
ROTA-S plus 2.0 315-92 D6-VP1 0819244 315 mm ISO 702-2 Nr.6 Angled Serration 3400 180 220 9.7 7 133 64.7
ROTA-S plus 2.0 315-92 D6-VP2 0819144 315 mm ISO 702-2 Nr.6 Angled Serration 3400 180 220 9.7 7 133 64.7
ROTA-S plus 2.0 315-92 D8-SFG 0819054 315 mm ISO 702-2 Nr.8 Angled Serration 3400 180 220 9.7 7 138 66.7
ROTA-S plus 2.0 315-92 D8-VP1 0819254 315 mm ISO 702-2 Nr.8 Angled Serration 3400 180 220 9.7 7 138 66.7
ROTA-S plus 2.0 315-92 D8-VP2 0819154 315 mm ISO 702-2 Nr.8 Angled Serration 3400 180 220 9.7 7 138 66.7
ROTA-S plus 2.0 315-92 D11-SFG 0819064 315 mm ISO 702-2 Nr.11 Angled Serration 3400 180 220 9.7 7 143 67.5
ROTA-S plus 2.0 315-92 D11-VP1 0819264 315 mm ISO 702-2 Nr.11 Angled Serration 3400 180 220 9.7 7 143 67.5
ROTA-S plus 2.0 315-92 D11-VP2 0819164 315 mm ISO 702-2 Nr.11 Angled Serration 3400 180 220 9.7 7 143 67.5
ROTA-S plus 2.0 400-102 D8-SFG 0814243 400 mm ISO 702-2 Nr.8 Angled Serration 2200 230 280 12 8.5 - 117
ROTA-S plus 2.0 400-102 D8-VP1 0814343 400 mm ISO 702-2 Nr.8 Angled Serration 2200 230 280 12 8.5 - 117
ROTA-S plus 2.0 400-102 D8-VP2 0814643 400 mm ISO 702-2 Nr.8 Angled Serration 2200 230 280 12 8.5 - 117
ROTA-S plus 2.0 400-102 D11-SFG 0814244 400 mm ISO 702-2 Nr.11 Angled Serration 2200 230 280 12 8.5 - 118
ROTA-S plus 2.0 400-102 D11-VP1 0814344 400 mm ISO 702-2 Nr.11 Angled Serration 2200 230 280 12 8.5 - 118
ROTA-S plus 2.0 400-102 D11-VP2 0814644 400 mm ISO 702-2 Nr.11 Angled Serration 2200 230 280 12 8.5 - 118
ROTA-S plus 2.0 500-162 D8-SFG 0814254 500 mm ISO 702-2 Nr.8 Angled Serration 1500 270 320 12 8.5 - 180
ROTA-S plus 2.0 500-162 D8-VP1 0814354 500 mm ISO 702-2 Nr.8 Angled Serration 1500 270 320 12 8.5 - 180
ROTA-S plus 2.0 500-162 D8-VP2 0814654 500 mm ISO 702-2 Nr.8 Angled Serration 1500 270 320 12 8.5 - 180
ROTA-S plus 2.0 500-162 D11-SFG 0814255 500 mm ISO 702-2 Nr.11 Angled Serration 1500 270 320 12 8.5 - 182
ROTA-S plus 2.0 500-162 D11-VP1 0814355 500 mm ISO 702-2 Nr.11 Angled Serration 1500 270 320 12 8.5 - 182
ROTA-S plus 2.0 500-162 D11-VP2 0814655 500 mm ISO 702-2 Nr.11 Angled Serration 1500 270 320 12 8.5 - 182
ROTA-S plus 2.0 500-162 D15-SFG 0814256 500 mm ISO 702-2 Nr.15 Angled Serration 1500 270 320 12 8.5 - 200
ROTA-S plus 2.0 500-162 D15-VP1 0814356 500 mm ISO 702-2 Nr.15 Angled Serration 1500 270 320 12 8.5 - 200
ROTA-S plus 2.0 500-162 D15-VP2 0814656 500 mm ISO 702-2 Nr.15 Angled Serration 1500 270 320 12 8.5 - 200
ROTA-S plus 2.0 630-252 D11-SFG 0814263 630 mm ISO 702-2 Nr.11 Angled Serration 1000 270 350 15 8.5 - 256
ROTA-S plus 2.0 630-252 D11-VP2 0814663 630 mm ISO 702-2 Nr.11 Angled Serration 1000 270 350 15 8.5 - 256
ROTA-S plus 2.0 630-252 D15-SFG 0814264 630 mm ISO 702-2 Nr.15 Angled Serration 1000 270 350 15 8.5 - 256
ROTA-S plus 2.0 630-252 D15-VP2 0814664 630 mm ISO 702-2 Nr.15 Angled Serration 1000 270 350 15 8.5 - 256

 

  • Convenient jaw quick-change system -Minimizing set-up times and costs
  • Large through-hole -Machining of all standard pipe diameters
  • High efficiency of the wedge bar system -Process-reliable clamping due to high clamping forces
  • High jaw quick-change repeatability -No reboring of already machined jaws necessary
  • Visual safety devices -Maximum operating safety
  • Optimized lubrication system -Consistently high clamping forces are ensured
  • Modular center sleeve system -Optimum adjustment to new clamping tasks due to exchangeable center sleeves
  • Excellent clamping force/torque ratio -Perfect use of the machine performance
  • Angled serrated base jaws SFG -Interchangeable with ROTA-S plus and with system “F“ (Forkardt)
  • Ergonomic, light safety spanner wrench -Ensures easy operation
  • All functional parts are ground and hardened -High run-out and jaw change repeat accuracy

The ROTA-S plus 2.0 manual lathe chuck is a highly efficient power lathe chuck for the most varied of clamping tasks. This is available as a 2-jaw or 3-jaw chuck. The high degree of efficiency of the wedge bar system and the optimized lubrication system ensure process-reliable clamping and consistently high clamping forces. The excellent clamping force/speed ratio allows full use of the machine performance, and increases efficiency in your production.

You can reduce set-up costs with the ROTA-S plus 2.0 quick-change jaw range, which cuts the set-up process down to less than 60 seconds. Due to its protection sleeve system the ROTA-S plus 2.0 can be adapted to a wide range of clamping tasks.

 

UNLOCK GREAT OFFERS! DON’T MISS OUT AND FOLLOW US ON  fb