Polledri Back Spotfacing System Group 30

0

Polledri Back Spotfacing System Group 30

QUANTITY

Back Spotfacing Cutters

With a range from diameter 12 to diameter 125, backspotfacing cutters are manufactured to be fixed to the wide range of pilot arbors diameters through a quick change bayonet which allows, in a short time to fix and remove the citter from the arbor in a way that it’s possible to change quickly from one hole to another one.

Share

back

group30

 

    

group3000   ARBORS FOR BACK SPOTFACING CUTTER GR.30 from Ø 30 to Ø 46

The arbors specially devised for our back-spotfacing cutters, have a threaded hole at the end of the taper to allow the locking of the arbor to the machine by means of a drawbar. Alternatively, they can be used with the tang end and locked to the machine with the positioning slot if available. M.T 4 with locking slot DIN 1806.

 

ARBORS in carburized and hardened steel 60 HRC

  • GROUP 30
  • RANGE: from Ø 30 to Ø 46
  • CODE: 30.04
  • (EX. Ø 30: 30.04.300)

 

 

 

 

group30000

group40  ARBORS FOR BACK SPOTFACING CUTTER GR.40 from Ø 40 to Ø 62

 

The arbors specially devised for our back-spotfacing cutters, have a threaded hole at the end of the taper to allow the locking of the arbor to the machine by means of a drawbar. Alternatively, they can be used with the tang end and locked to the machine with the positioning slot if available. M.T 5 with locking slot DIN 1806.

 

ARBORS in carburized and hardened steel 60 HRC

  • GROUP 40
  • RANGE: from Ø 40 to Ø 62
  • CODE: 40.04
  • (EX. Ø 40: 40.04.400)

 

 

 

 

group400

30c   Back and Forward Spotfacing cutters in HSS HRC 63 From Ø 60 to Ø 80 

You can fit them on all the Polledri arbors of the same group. You can connect them on the arbors quickly because they have an special quick change bayonet system. Using a good soluble oil you can increase the speed with an increase of the tool life. Can also be used for forward spotfacing operations.

 

BACK AND FORWARD SPOTFACING CUTTERS, 3 FLUTES HSS 63 HRC

  • GROUP 30
  • RANGE: from Ø 60 to Ø 80
  • CODE: 30.01
  • (EX. Ø 60: 30.01.600)

 

 

 

30cc30ccc

 

 

 

30cccc

 

30md   BACK AND FORWARD SPOTFACING CUTTER in HARD METAL ISO K 30 from Ø 60 to Ø 80

You can fit them on all the Polledri arbors of the same group. You can connect them on the arbors quickly because they have an special quick change bayonet system. Using a good soluble oil you can increase the speed with an increase of the tool life. Can also be used for forward spotfacing operations.

 

BACK AND FORWARD SPOTFACING CUTTER, 3 FLUTES HARD METAL ISO K30

  • GROUP 30
  • RANGE: from Ø 60 to Ø 80
  • CODE: 30.02
  • (EX. Ø 60: 30.02.600)

 

 

 

 

30mdd30mddd

 

 

 

30mdddd

m16  Penola M.16 per Gambi C.M.4

rolling   ROLLING PILOTS FOR ARBORS GR.30 from Ø 30 to Ø 46

 

In many cases spot-facing operations present considerable difficulties, it is most useful therefore to have available versatile and efficient tools which carry out such operations in an easy and speedy manner. With this in mind Polledri have introduced in the back-spotfacing cutters of Groups 30 and 40 a very important innovation, that is a Rolling Pilot which is fitted to the tool and permits also forward spotfacing operations, consequently the cutter and arbor can be used for operations in back-spotfacing and can also be used for forward spotfacing operations.

 

ROLLING PILOTS in carburized and hardened steel 60 HRC

  • GROUP 30
  • RANGE: from Ø 30 to Ø 46
  • CODE: 30.05
  • (EX. Ø 30: 30.05.300)

 

 

UNLOCK GREAT OFFERS! DON’T MISS OUT AND FOLLOW US ON  fb