Lubrication Coolant Distribution
Unist Serv-O-Spray™
QUANTITY
Serv-O-Spray™ features MQL performance for operations where only a precise intermittent pulse or shot of lubrication is required. Perfect for drilling and tapping small holes, punching, and more.
Delivers precise, repeatable single shots of lubricant
With its precision positive displacement pump and individually adjustable air and fluid volumes, the Serv-O-Spray™ spray lubrication system is the perfect Minimum Quantity Lubrication solution for any operation where controlled, intermittent fluid application is needed.
- Single-shot precision output
- Reliable Unist pump
- Separate air/fluid control
- Ideal MQL solution - for short-cycle machining
Serv-O-Spray™
1 signal = 1 shot of lubricant
- Deliver a fixed amount of fluid with each and every shot
- Adjustable pumps deliver 0.003 - 0.100 mL per stroke.
- Pumps are air actuated
- Easy adjustability and control over spray consistency.
- Neat, clean fluid delivery - Eliminate the mess of flood coolants
- Improves cut quality
- Made for environmentally friendly Coolube®
- Dry chips - higher recycling value
- Single-shot precision output
- Reliable Unist pump
- Separate air/fluid control
- Ideal MQL solution - for short-cycle machining
Outputs: |
|
Pumps(4 types available): |
|
Actuation: | Control air input with manual valve, air pilot valve, or 3-way solenoid valve (110VAC or 24VDC) |
Reservoirs: |
|
How it works:
- The Serv-O-Spray™ pump is ready to dispense a shot of fluid.
Note: The system is full of fluid (green) all the way to the nozzle tip
- When an air signal (blue) is applied, the pump piston strokes, immediately pushing a fixed quantity of fluid out the nozzle tip. Simultaneously, an adjustable amount of air surrounds the fluid to break it up and propel it to the point of application.
Intermittent output
Actuating your Serv-O-Spray™ spray lubrication system is easy. Every time a compressed air signal is supplied from an actuation valve, the pump will deliver one quick shot of fluid out the nozzle tip along with a controlled amount of air. Air continues to flow from the nozzle tip until the air actuation valve is closed. Each time air is supplied in the spray lubrication system, the pump immediately fires another shot. The pumps can be cycled as often as needed, up to 150 times per minute.
Separate fluid & air
Our Co-Axial nozzles keep the air and fluid separate right up to the spray tip. This unique configuration can deliver fluid over long distances without the need for excessive amounts of air. Each time the pump strokes, a metered amount of fluid sprays out the nozzle tip, and is immediately atomized by the outer jacket of air. This feature on our spray lubrication systems delivers a balanced spray pattern at the point of application.
Dial in the "sweet spot"
The Serv-O-Spray™ was designed for precise control over the fluid application with separate fluid and air volume adjustments. This means that finding the sweet spot for your application is a breeze and once it’s set, the Serv-O-Spray™ spray lubrication system will deliver the same amount of fluid again and again.
Serv-O-Spray's™ modular design
can be configured for almost any application! Pumps can be actuated independently or in groups to spray multiple points with a single control valve.
Serv-O-Spray™ applications:
- Supplemental and spot lubrication
- Single or multiple spindle drills and taps
- In-die lubrication