Modular Hose Systems
Loc-line 1/4" In-line Valve
- Buy Brand New
Loc-Line In-Line Valve for 1/4" ID System
Regulate coolant or air flow to your work area. 1/4 turn of handle opens or closes the valve.
Light-weight and compact for in-line use. Body and stem material is acetal copolymer. Stem seals are nitrile (Buna N).
Materials and Properties:
Material: Acetal Copolymer
Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide
No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329F
Maximum Operating Temperature: 170F (Repeated exposure to this temperature will cause fatigue)
Recommended Maximum Line Pressure & Flow Rates:
50 PSI 250 gph
110 PSI 500 gph (With Element Clamps)
Information regarding FDA (Federal Food and Drug Administration).
Loc-Line is made of an Acetal copolymer. This material in accordance with the rules in 21CFR 177.2470 meets the requirements of this regulation for food contact. All colorants are used at the recommended let-down ratio to meet 21CRF 178.3297. Loc-Line is not sanctioned for use with alcoholic or fatty foods at any temperature. The material also meets NSF International Standards 14, 51 and 61 for contact with potable water
Please note that all applications have variables and conditions that will affect the maximum working pressures. Testing suitability for your application is always recommended.
- Full 1/4" inside diameter
- Maximum working pressures: 1/4" Hose: 30 PSI, 1/4" Inline valve: 30 PSI, 1/4" male/female valves: 100 PSI
- Body and stem material: Acetal Copolymer / Stem seal: Nitrile (Buna N)
- 1/4 turn shut off